I’ve been seeing a lot of bazzite recommendations recently, and it sure sounds great. An atomic fedora, gaming optimisations out of the box. It just works.
We’ll that’s not been my experience for V-rising, and I wanted to share it incase others anyone else encounters the issues I did.
First and foremost I am sure there major issue is the game, more than any given distro. I’ve been happily running arch on my home PC for 7 years. Its been great, no issues, I’ve loved it. As my free time decreased, that computer had become just for gaming. The maintenance debt was building up, I knew the dream run with arch must end. That end was V rising, crashed frequently, all kinds of stage behaviour. I assumed a vulkan issue, but couldn’t easily find a fix, and didn’t want to waste any more time on it.
I went with Bazzite, but to no avail. The crashing problem got worse. Only now i had to deal with the sluggish flatpack versions of things. Its not that bad, but us a was a very noticeable change.
If it had just been me, I think this is whereui would have given up. But I was playing with my wife and mate online, both of whom also use Linux and weren’t having the crashing issue. On my wifes computer i had recently installed bazzite. It did have issues, mostly flickering which i chalked up to a too early switch to Wayland on a gtx1080. My mate was on mint, with a 3060 and v rising was working perfectly.
I switched to mint (I am running and a 5700xt), and my problems were fixed just like that.
Next was to solve the wife’s woes, so I switched her to mint too. Which resulted in v rising not being able to load, freezing up the computer every attempted requiring a X restart. Didn’t matter which version of the nvidia drivers i used. The flickering was gone though, so that was something. Pop-os was the solution, took a bit of understanding popshops preferred order of events to get nvidia drivers installed, but now all is fine.
So the lesson I think i might have learned, old hardware and new (vulkan) games require unidentified settings to work and easiest solution is just distro hop till success. Big shout out to steams transfer over network functionality (i also needed to install bg3 each new distro, it ran fine on every combination but bazzite was noticably more flaky).
It doesn’t matter, but does any one have and ideas as to why v rising caused such headaches? 7 years a Linux gaming, and nothing has required more than a few hours of tinkering at most to get to work until this.
Tldr. Needed a safe space to debreif, everything worked out in the end.
Actually, this particular issue is a bug in the Linux kernel that has been patched in version 6.9. The display manager isn’t going to change anything other than (maybe) the issues their wife had on Bazzite. In fact, OP stated in their post that they are running an AMD GPU (5700XT). You can always install the X11 package as an overlay and switch to it if you want with Fedora Atomic or Bazzite. It’s still in the repos, it just isn’t the default anymore. There’s no need for an image with X11 in it by default, especially with explicit sync support coming soon that will fix many of the remaining issues with Nvidia on Wayland.
On Bazzite you could also swap to the gnome version for a bit without worrying. That one is still X11
True its still in the repo, I thought it was only on COPR.
Dont know GPU names but well, that is the issue when using Fedora and not SteamOS, where they test everything before shipping it.
Fedora does test everything before they ship it. Each major kernel release can go through as much as a month of testing for stability and regression. SteamOS is based on Arch, where they don’t test the kernel for regression. Despite testing though, this is an incredibly obscure issue, and obviously the Fedora team can’t catch every kernel bug. It only happens on some hardware, and only in the event that the VRAM visible to the CPU is filled, and less used portions of the CPU-visible VRAM are moved to other parts of VRAM that only the GPU can see. This is why resizable bar fixes the issue for many, as it makes all VRAM visible to the CPU, so there is no move that happens (moving the VRAM data has an off by one error). This issue goes all the way back to 6.6.30, and was only discovered 3 weeks ago, and took 2 weeks to find the root cause of and patch in the stable version of kernel 6.9. It was only found because the 6.9 release candidates added checks for hardware capabilities, and the off by one error that is the root cause of this issue threw an error with the hardware capability checks. I’m not a kernel developer, so I don’t know all the details, but it is discussed in the issue I linked if you want more explanation.
Nice, thanks for the info!
Yes but I mean Steam may test many games with this specific setup. Fedora is a way better base in general, if you leave out the issues with external repos (mainly openh264, rpmfusion is maintained by fedora people, 100%)
Yes, that may be the case, but that comes with its own downsides as well. The most recent version of SteamOS runs the 6.1.52 kernel from September (thus it should be unaffected by this bug, since it was introduced in 6.6.30). I don’t follow kernel changelogs very closely (so I don’t know all the new features and improvements that are being missed from new versions), but there are lots of optimizations and new features constantly being added to the kernel. Of course, the tradeoff is that you don’t get new bugs, but you also have to backport bug fixes or else you’ll have the bugs present in your current version for a very long time (often the kernel devs do this, but depending on what version a given distro uses, the distro maintainers may have to do it themselves). It’s not as big of a freeze as Debian based systems (EDIT: Some of the time; right now they are technically behind Debian on the kernel minor release, but in SteamOS 3.6 (which is in beta), they will be updating to 6.5), of course, but it’s a choice that has tradeoffs. Different people will subscribe to different opinions on kernel updates, given that no one way is clearly superior for user experience and features alike.
As for proprietary packages that are held from Fedora for copyright issues (media codecs and Nvidia drivers, for instance), there are always uBlue images like Bazzite, Bluefin, and Aurora that fix that. One of the very few stipulations to the Red Hat sponsorship for Fedora is that they do everything possible to avoid legal trouble, hence why those packages aren’t included in the base repos or installed by default. It’s a small caveat that disappears once you install the correct packages.
I think SteamOS is by far the most optimized OS for the Steam Deck, but I don’t think it’s very useful to use it on any other hardware (there are better options). Kernel updates will always be a point of conflict for at least some people regardless of what model you use, but I personally appreciate the quick turnaround for major kernel versions in Fedora. It’s actually improved my experience on my laptop significantly, as there have been recent changes that apply to my specific hardware (in some of the 6.6 releases, for instance). Of course, anyone can be free to prefer a slower rollout, and that is equally valid. The bug fixes for the issue OP is having should be backported to 6.8 anyway, so it shouldn’t necessitate waiting for 6.9 to hit Fedora in a few weeks.
Very true. I am also very critical of any form of “stable packages”. Firefox ESR the LTS kernel are the only exception but if SteamOS doesnt use the LTS kernel then wtf are they doing?
I honestly dont care about gaming :D I waste way too much time away from touching grass anyways.
But I hope they backport all security fixes anyways, as the SteamDeck is now one of the most predictable Linux botnet-targets out there.
Yes I know and use uBlue since basically it came out :D awesome project
But I specifically mean the packaging delays. There are sometimes sync issues with drivers, like this recent one with no free stuff that is used alongside the normal stuff.
And with Cisco-openh264 they cant to anything, Cisco ships the packages which is legally binding, and there are issues sometimes.
But Fedora is doing a great job, and the fact that rpmfusion exists alone is pretty hillarious. These are obviously Fedora people maintaining the stuff in secret, in a country where patent laws are not enforced (but are also in place afaik).
I guess so too? I dont know, Fedora Kinoite (whatever small derivative, currently ublue kinoite-main, soon aurora) works just really well.
You are at the bleeding edge, but I often find bugs that are simply there and need to be fixed. Once KDE Plasma 6 is on some LTS release like CentOS Stream, I may think about switching.
But until then, Fedora is just really good.
SteamOS currently runs 6.1, which is an LTS kernel, it just isn’t the latest LTS kernel (that’s 6.6 released at the end of 2023). Steam also makes modifications to the kernel they use in SteamOS, so they have their own versions custom built for Steam Decks. I should revise my previous statement slightly. Debian Bookworm is on 6.1 as well, but SteamOS 3.6 (in beta) uses 6.5 (which is non-LTS). Debian skips every other LTS kernel because they release every 2 years, but SteamOS (eventually) upgrades each LTS kernel or some non-LTS between? They did the same thing with 5.13 a couple years ago (5.10 and 5.15 are LTS). I don’t really follow their releases since I don’t own a Steam Deck, so I don’t really know the rationale there. Funnily enough, looking through posts about it online, it seems that SteamOS is sometimes ahead of Debian on the minor kernel version and sometimes behind (when they’re on an LTS kernel). Currently, they are behind Debian on minor release (6.1.52 vs 6.1.76). Very strange, no idea what’s going on there.
Hm, interesting. I don’t recall experiencing anything like that personally since I hardly use anything from RPMFusion, but that does seem frustrating. Looks like it was fixed very quickly, at least.
Ah yeah, I’ve heard about that. I can’t remember the last time I installed Cisco’s openh264 though since I started using VLC, which can handle video and audio formats without installing extra codecs. I think MPV can do the same? I’m not sure what comes with my browser, but it is packaged as a flatpak and seems to run media just fine. Maybe there is some other use for openh264 that I’m not aware of that just doesn’t come up in my normal use, but I don’t think I’ve installed any media codecs in Fedora for a couple years now. Granted, I don’t play videos often (but I do play MP4s when I do), and all my music is in FLAC format, so I’m probably an edge case. I also don’t game, but I remember seeing something recently in this sub where someone may have had codec issues while playing a game.
Well, Fedora is a community project, so it’s very difficult for anything individual maintainers do to come back to Fedora so long as the name isn’t put on it directly. If I were to speculate, most of the RPMFusion maintainers are Fedora community contributors (and I imagine they likely wouldn’t work at Red Hat, given Red Hat’s apprehension towards copyrighted material). I don’t think it’s really any different legally speaking from a Fedora contributor working on a personal project on the side. The fact that you can manually add the repo to Fedora doesn’t connect the two in a legally binding sense. So as long as it isn’t being funded by Fedora, and their branding is absent, then it shouldn’t really matter. I don’t know about the actual legal aspects of the packages they are distributing, or what country/countries RPMFusion repos are hosted in, but so long as nobody is profiting/losing substantial profit, it likely isn’t even worth pursuing any legal recourse to begin with.
Yeah, that’s fair. There are definitely bugs that pop up every once and awhile, but for the most part they’re minor (at least the ones I notice). This kernel bug is among the more major bugs I’ve seen with Fedora in the past few years, but I only know about it from this post; I haven’t experienced it myself. I imagine there have been similar things (or worse) like this that have gone over my head as I didn’t experience them myself. Perhaps my experience has also been more stable because I’ve been using GNOME up until Fedora 40. I do find my experience with Fedora to be much more stable than Arch, but that is to be expected given their release models. I can only recall having experienced 1 or 2 bugs in the past year on Fedora, which is less than I experienced when I used Ubuntu many, many years ago, and the bugs were fixed much faster than they were on Ubuntu, where it would often take months for a patched version of the package to enter the Ubuntu repos. That’s all anecdotal, however.
The reason I usually recommend Fedora to people (and uBlue images by extension) is that it sits on some middle ground between the rolling release bleeding edge distros like Arch, and the stable, LTS, frozen for 2 years distros like Debian. I have grievances with both of those models that are addressed with Fedora, and that’s what makes it a good distro for me. My experience with bugs hasn’t really been any more common than when I was using LTS distros, but that may be a fluke. I will likely be moving one of my servers to Debian in the future though, because it makes sense for its purpose. Different release models benefit different uses (and people), of course.
I use celluloid flatpak which has native wayland and pipewire support. Its an MPV GUI.
But browsers should be installed as an RPM, because Flatpak uses the same seccomp filter for all apps. That isnt even really secure, but prevents browsers from spawning user namespace sandboxes. Which means they have very little process isolation.
User namespaces are not the only method of sandboxing in Linux. I use Mullvad browser, which is a fork of Firefox maintained in tandem with the Tor browser (without Tor integration), so I’ll mainly discuss Firefox. Here are some relevant comments on Firefox’s internal sandbox in flatpaks:
Firefox’s internal sandbox is designed to function properly without user namespaces or chroot
Firefox uses nested seccomp filters to achieve process isolation
The TL;DR is that Firefox uses seccomp-bpf on each process (with per-process nested seccomp filters) to intercept all syscalls for sandboxing, which does not require the use of user namespaces. User namespaces are used where possible, simply to add an additional layer of padding as a method of defense in depth. Since the syscalls are already intercepted and handled with seccomp-bpf, it could easily be argued that this is redundant and unnecessary given the way the Firefox sandbox works, based on the comments of the Firefox developer I linked to.
Chromium browsers had very bad issues with sandboxing, as they assumed that user namespaces would always be available (which breaks on any distro with them disabled in the kernel, as was the case with Debian and Arch just a few years ago, or any install that uses the linux-hardened kernel), and Chromium does not use seccomp-bpf for their process isolation like Firefox (or at least it didn’t when the bugzilla I linked to was made). I believe those issues have been fixed however, and Chromium-based browsers (at least the ones that implement the patch or something similar) should also have proper process isolation in flatpaks now. I don’t follow that very closely since I don’t use Chromium-based browsers, though. Here’s the flatpak Chromium patch that uses
flatpak-spawnto fix process isolation in Chromium-based browsers for reference. It was mentioned in one of the Firefox bugzilla pages I linked to earlier. Since it isn’t an upstream fix, I wouldn’t trust that all Chromium-based browsers use it, but that’s an issue to bring up with Google (assuming it hasn’t been fixed upstream in the past couple years). Firefox specifically designed their sandbox to work in these situations where Chromium may fail.Mullvad Browser isn’t available as an RPM (or even DEB), and while they have a tar.xz download that I imagine just installs the browser in the folder it’s extracted to (not source tarball; it’s all pre-compiled), I have no idea if that receives automatic updates, and I’ve never used a Linux app packaged like that, so I choose to use the flatpak instead.