“Just to meet business-as-usual trends, 115% more copper must be mined in the next 30 years than has been mined historically until now,” the study said.

  • LovesTha🥧@floss.social
    link
    fedilink
    arrow-up
    0
    ·
    7 months ago

    @NotMyOldRedditName Are power carrying wires the bulk of the wires in a car?

    And by power I mean more than 5W where wire gauges start to get serious at 12V. An indicator LED is technically needing power, but not enough that wire gauge bulks up.

    • NotMyOldRedditName@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      edit-2
      7 months ago

      Wiring harnesses from traditional automotive companies are quite long. This is quote from Ford’s CEO

      ““We didn’t know that our wiring harness for Mach-E was 1.6 kilometers longer than it needed to be. We didn’t know it’s 70 pounds heavier and that that’s [cost an extra] $300 a battery,””

      4km is normal

      https://q5d.com/escalating-function-dilemma/

      "Some modern vehicles contain close to 40 different harnesses, comprised of roughly 700 connectors and over 3000 wires. If taken apart and put into a continuous line, these wires would exceed a length of 2.5mi (4km) and weigh approximately 132lbs (60kg). Five years ago, vehicles had 25% less circuits than today’s cars. Five years from now, that number will increase by more than 30%. "

        • NotMyOldRedditName@lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          edit-2
          7 months ago

          Fair, but you can’t do 12v ethernet like they’ve done with 48v. The cables would be too big

          So unlocking 48v allowed the change which allowed lesser cabling.

          Tesla claims it’s 77% cable reduction and 50% copper.

    • NotMyOldRedditName@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      edit-2
      7 months ago

      Also just for reference, this is what Tesla’s double redundant 48v etherloop cable looks like, instead of those chonky wiring harnesses

      Edit: Just to clarify here, I think I made an assumption about the double redundancy. The cable runs in a loop around the car, and if any cable gets cut, it can still reach the component via the other direction (A<->B<->C<->A). I think I just assumed the 2 wires in the image were redundant. It could be that different data is flowing over both strands and those are not for redundancy.