My laptop is an MSI Sword 15 A11UD. But I’m really looking for a program that analyses and projects problem areas and supported/unsupported hardware

  • eldavi@lemmy.ml
    link
    fedilink
    arrow-up
    10
    ·
    5 months ago

    yes, that will happen.

    the live distro’s come included with a lot of preloaded driver/firmware that is not included with a regular installation for a myriad of reasons; but you can use lspci and lsmod from the live environment to identify the proper software you need to add to your regular installation to get that hardware working.

      • StrawberryPigtails@lemmy.sdf.org
        link
        fedilink
        arrow-up
        9
        ·
        5 months ago

        Sometimes it’s an ideological issue. Some distributions don’t ship nonfree drivers, some do, but require you to manually install them, and some have trouble making up their mind. This last is where you get live cds that automatically load the drivers needed for your hardware, but when you actually install, things aren’t working anymore.

    • stravanasu@lemmy.ca
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      5 months ago

      Thank you, that’s useful info, I didn’t know about this. Could you be so kind to share some link, or say something more, about lspci and lsmod and how to proceed from them to identifying which drivers one should install? Cheers!

      • eldavi@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        5 months ago

        here’s an example using my wifi card on my laptop; here i use lscpi and i’ve copy/pasted the stanza that pertains to the wifi card:

        me@laptop:~$ lspci -v
        [REMOVED]
        00:14.3 Network controller: Intel Corporation Alder Lake-P PCH CNVi WiFi (rev 01)
                DeviceName: Onboard - Ethernet
                Subsystem: Intel Corporation Dual Band Wi-Fi 6(802.11ax) AX201 160MHz 2x2 [Harrison Peak]
                Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 9
                Memory at 601d18c000 (64-bit, non-prefetchable) [size=16K]
                Capabilities: <access denied>
                Kernel driver in use: iwlwifi
                Kernel modules: iwlwifi
        [REMOVED]
        

        i can see that the driver name is iwlwifi and i can use that to look for related modules using lsmod:

        me@laptop:~$ lsmod | grep iwlwifi
        iwlwifi               598016  1 iwlmvm
        cfg80211             1318912  3 iwlmvm,iwlwifi,mac80211
        

        now i know all of the module names and i can either google them to learn how to install them or i can continue further with the package manager on the installation to further backwards engineer it. (googling is faster).

        as i mentioned earlier there are caveats: downstream distros tend to use a slightly older version of their base distros so you also need to make sure that you’re using the same version of the driver and kernel and adjust accordingly if it doesn’t start working right away.

        • rotopenguin@infosec.pub
          link
          fedilink
          English
          arrow-up
          2
          ·
          5 months ago

          Also do “dmesg | grep -i firmware” to see what firmware loads the kernel squirted into the various device controllers.

        • stravanasu@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 months ago

          Fantastic, this is extremely helpful, thank you! 🥇 I wanted to test a couple of distros for my Thinkpad, and I’ll make sure to check and save this kind of information from live USBs.