From time to time, often after I’ve restored from sleep or finished playing a Steam game, one of my CPU cores is pinned at 100% with no indication of what might be doing it. Running htop, btop, or GNOME system monitor all show the same thing: CPU0 at 100% while the rest are doing near-nothing, and no process in particular seems to be using those resources.

If I restart, it’s back to normal, and sometimes I can play a game in Steam or let the computer go to sleep and it doesn’t do this, but it happens often enough that’s annoying/confusing so I’d like to know if there’s a way to either (a) diagnose which processes are using which CPU cores, or (b) somehow “reset” the checking of these values to make sure that something’s not just being misreported.

This is a desktop system running Arch & GNOME.

  • scrion@lemmy.world
    48·
    2 months ago

    An interrupt is an input that can be triggered to interrupt normal execution. It is used for e. g. hardware devices to signal the processor something has happened that requires timely processing, so that real-time behavior can be achieved (for variable definitions of real-time). Interrupts can also be triggered by software, and this explanation is a gross oversimplification, but that information is what is most likely relevant and interesting for your case at this point.

    The commands you posted will sort the interrupts and output the one with the highest count (via head -1), thereby determining the interrupt that gets triggered the most. It will then disable that interrupt via the user-space interface to the ACPI interrupts.

    One of the goals of ACPI is to provide a kind of general hardware abstraction without knowing the particular details about each and every hardware device. This is facilitated by offering (among other things), general purpose events - GPEs. One of these GPEs is being triggered a lot, and the processing of that interrupt is what causes your CPU spikes.

    The changes you made will not persist after a reboot.

    Since this is handled by kworker, you could try and investigate further via the workqueue tools: https://github.com/torvalds/linux/tree/master/tools/workqueue

    In general, Linux will detect if excessive GPEs are generated (look for the term “GPE storm” in your kernel log) and stop handling the interrupts by switching to polling. If that happens, or if the interrupts are manually disabled, the system might not react to certain events in a timely manner. What that means for each particular case depends on what the interrupts are being responsible for - hard to tell without additional details.