I’ve got a QNAP NAS and two Linux servers. Whenever the power goes down, the UPS kicks in and shut downs the NAS and the Linux servers, all good. The servers + NAS are automatically started when the power comes back on line using WOL. All good.

The problem is that I have apps running using Docker which heavily rely on connections to the NAS. As the Linux servers boot quicker than the NAS, the mount points are not mounted, and thus everything falls apart. Even when I manually re-mount, it’s not propagated to the Docker instances. All mount points use NFS.

Currently, I just reboot the Linux servers manually, and then all works well.

Probably easiest would be to run a cron job to check the mounts every x minutes, and if they are not mounted, then just reboot. The only issue is that this may cause an infinite loop of reboots if e.g. the NAS has been turned off.

I could also install a monitoring solution, but I’ve seen so many options that I’m not sure which one to do. If it’s easier with a monitoring solution, I’d like the simplest one.

    • Avid Amoeba@lemmy.caEnglish
      29·
      10 months ago

      This is the answer. You can straight up make things dependent on .mount units that represent stuff in fstab. To add, you can create any number of systemd services that just check if something is “as you want it” and only then “start”. You simply make the Exec line “/bin/bash -c ‘your script here’”. Then you make whatever else you want dependent on it. For example I have such a unit that monitors for Internet connection by checking some public DNS servers. Then I have services that depend on Internet connection dependent on that. Here’s for example my Plex service which demonstrates how to depend on a mount, docker and shows how to manage a docker container with systemd:

      ~$ cat /etc/systemd/system/plex-docker.service
[Unit]
Description=Plex Media Server
After=docker.service network-internet.service media-storage\x2dvolume1.mount
After=docker.service

[Service]
TimeoutStartSec=0
Restart=always
RestartSec=10
ExecStartPre=-/usr/bin/docker rm -f plex
ExecStartPre=/usr/bin/docker pull plexinc/pms-docker:latest
ExecStart=/usr/bin/docker run \
        --name plex \
        --net=host \
        -e TZ="US/Eastern" \
        -e "PLEX_UID=1000" \
        -e "PLEX_GID=1000" \
        -v /tmp:/tmp \
        -v /var/lib/plex/config:/config \
        -v /var/cache/plex/transcode:/transcode \
        -v "/media/storage-volume1:/media/storage-volume1" \
        plexinc/pms-docker:latest

[Install]
WantedBy=multi-user.target

      BTW you can also do timers in systemd which allows doing what you can do with cron but much more flexibly and utilize dependencies too.

      • Sam Black@lemm.eeEnglish
        10·
        10 months ago

        You can use RequiresMountsFor= (eg RequiresMountsFor=/media/storage-volume1) instead of manually adding .mount to After/Requires - you can then use .mount files or fstab as you’re stipulating the path rather than a potentially changeable systemd unit name.

        The systemd.mount manpage also strongly recommends using fstab for human added mount points over .mount files.

      • sylverstream@lemmy.nzOPEnglish
        2·
        10 months ago

        That’s interesting! I’ve converted all my docker run commands to docker compose, as I found that easier to manage. But, I guess you can’t do the dependencies like you have. Also, yours has the advantage it always pulls the latest.

        • key@lemmy.keychat.orgEnglish
          2·
          10 months ago

          Doesn’t seem mutually exclusive. Replace the docker rm with compose down and the docker run with compose up.

          • Avid Amoeba@lemmy.caEnglish
            1·
            10 months ago

            Exactly. In fact I have a few multi-container services with docker-compose that I have to write systemd unit files for.

        • qaz@lemmy.worldEnglish
          1·
          10 months ago

          Perhaps you could also add the mounts as dependencies to the Docker daemon.

    • sylverstream@lemmy.nzOPEnglish
      4·
      10 months ago

      Sorry, I’m absolutely not a Linux expert :) I use /etc/fstab for the mounts, and to manually re-mount I run “mount -a”.

      • Avid Amoeba@lemmy.caEnglish
        7·
        10 months ago

        This is a great opportunity to learn a bit of systemd then. Look at my other comment. I’ve had a nearly identical problem which prompted me to learn in order to solve it years ago.

        Especially if you find a corner case autofs doesn’t cover. ☺️

        • sylverstream@lemmy.nzOPEnglish
          2·
          10 months ago

          Awesome, yes, definitely will do. After years of using Linux, the whole systemd thing is still a bit of a black box to me. I know how to create /start/stop services etc but that’s about it. Thanks for the prompt replies!