Hi everyone. I’m on the verge of building a new NAS/Media server, and wanted to check here to see if any of you could provide some recommendations based on my goals (below) or your current builds. I currently have a Raspberry Pi 4 running some basic services (Portainer, Home Assistant, Plex, sonarr/radarr/prowlarr, sabnzbd, etc.), but would like to expand my options and capabilities as my interests in the hobby grow.
My goals:
-
Ability to have 4+ 1080p streams on Plex. Right now my Pi works surprisingly well at home with one 1080 stream, but basically shits its pants doing much more. Would like to give my parents and a friend or two access.
-
Document storage/backup. Interested in Nextcloud, but it seems people have mixed experiences here.
-
Photo storage/backup.
-
Hosting the services mentioned above, plus some extra headroom for others. I’ll probably move back to Home Assistant OS on my Pi, unless you think I should utilize it for something else.
-
OS - unRaid. Not opposed to others, but this does seem to be a great option with a lot of how-guides and videos available.
-
Storage/Drives - I honestly don’t know how much I want or need. As it stands, my partner and I probably have less than 1TB of files and photos between the two of us (being very generous with that figure). Would like to expand the media server capabilities as mentioned above.
-
Budget - $1000 max including drives.
While the details above are what I would like to achieve with this, you can also consider me an empty canvas. Open to all ideas and suggestions. Let me know if there are other details I can provide that would be helpful. Lastly, thank you all for creating such a great community here.
You may want to consider a mini PC. That was my upgrade after torturing my raspberry pi for many years. I landed here after agonizing over building the perfect NAS media server. Still very low on power consumption, but the compute power per dollar is great these days. All this in only a slightly larger form factor over the pi. I brought over the drives from the pi setup and was up and running for a very low cost. The workload transferred from the pi (plex, NAS, backups, many microservices/containers) leaves my system extremely bored where the pi would be begging for mercy.
I don’t do a lot of transcoding, so I’m no expert here, but looking at the documentation I believe you would want a passmark score of 2000 per each 1080p transcode, so 8000+ for your 4+ streams, not including overhead for other processes.
Thanks for the great info! What mini PC did you end up going with? I’ve heard Beelink and a few others thrown around here and there, and most seem to be impressed with what they can do. Do you mind elaborating some on how you handle your drives with this type of setup? Do you just have some sort of NAS connected directly to the pc?
No worries. I got a beelink S12, non-pro model with 8G RAM and 256G SSD. It was on sale for about $150 USD. Fit my use case, but maybe not yours, although you might be surprised. Perhaps those extra plex share users won’t be concurrently transcoding?
The drives are all USB, the portable type that requires no power source. Like you, I don’t need much. I have ~12T across 3, with a small hub that could provide more ports in a pinch. This model I believe also provides a SATA slot for a 2.5” drive, but I haven’t used it. All of these drives were previously connected to a rpi 3B+, haha!
The drive shares are done via samba and also syncthing. I have no need for a unified share via mergerfs, but I did take a look at this site for some ideas. I’m the type that rolls all their own services rather than using an NAS based distro. Everything is in an ansible playbook that pushes out my configs and containers.
Edit: I should make it clear the NAS is for other systems to access the drives. Drives are directly connected via USB. All my services are contained in this single host (media/backup/microservices/etc). My Pi’s are now clustered for a k3s lab for non critical exploration.
I’m a bit of a minimalist who designs for my current use with a little room to grow. I don’t find much value in “future proofing” as I’ve never had much success in accomplishing that.
To play off what others are saying i think a mini pc and a stand alone nas may be the better route for you. It may seem counter intuitive to break it out into two devices but doing so will allow room for growth. If you buy a creeper bare bones mini pc and put more of your budget towards a nas and storage you could expand the mini pc without messing with your nas. You could keep the pi in the mix for a backup if your main pc is down or offload some services to it to balance performance.
Just want to second this - I use an Intel nuc10i7 that has quicksync for Plex/jellyfin, can transcode at least 8 streams simultaneously without breaking a sweat, probably more if you don’t have 4K, and a separate synology nas that mainly handles storage. I run docker containers on both and the nuc has my media mounted using a network share via a dedicated direct gigabit Ethernet connecting the two so I can keep all the filesystem access traffic off of my switch /LAN.
This strategy was to be able to pick the best nas based on my redundancy needs (raidz2 / btrfs with double redundancy for my irreplaceable personal family memories) while being able to get a cost effective low power quicksync device for transcoding my media collection, which is the strategy I chose over pre-transcoding or keeping multiple qualities in order to save HDD space and be flexible to the low bandwidth requirements of whoever I share with who has a slow connection.
For 1k you can build a beast.
Just throwing out an option if you aren’t aware, gohardrives on ebay and on their site sell used Hdds. 10Tb for $80. The catch is they’ve been used in data centers for 5 years. The company will guarantee the drives for an addition 5 years and it could save you a lot of money depending on how much you want to risk it. I went with 3, one being a parity drive in case other goes bad.
I currently have 6x10TB of these drives running in a gluster array. I’ve had to return 2 so far, with a 3rd waiting to send in for warranty also (click of death for all three). That’s a higher failure rate than I’d like, but the process has been painless outside of the inconvenience of sending it in. All my media is replaceable, but I have redundancy and haven’t lost data (yet).
Supporting hardware costs and power costs depending, you may find larger drive sizes to be a better investment in the long term. Namely, if you plan on seeing the drives through to their 5 year warranty, 18TB drives are pretty good value.
For my hardware and power costs, this is the breakdown for cumulative $/TB (y axis) over years of service (x axis):
