I’m a cheap ass who mostly gets old hardware, so it’ll probably be a while before I get to see the benefits of that.

Yeah lsblk, lsscsi, fdsik -l , go have a coffee, come back later and hit enter on dd

Then realize you typed the command wrong and panic when you don’t get an error.

Check eBay for used business micro/mini/tiny PCs. They’re pretty cheap, and low power consumption. They’re mostly Intel processors, so that’s what you make of it. If I were you I’d look for i3 processors 9th gen and up, i5 and i7 8th Gen and up for transcoding. They can hardware transcode pretty much anything but AV1, vp9, and hevc 12bit but the processors are powerful enough that they can transcode those to x265/264 to a device or two using the CPU without issues.

If you don’t plan on transcoding, I’ve had no issues with a 5th Gen i5 NUC doing server things, but I do offload any processor heavy things to my 7060 micro (8th Gen i7) machine if I want it done quickly.

They make houses out of human flesh

Those aren’t safety razors, just your normal disposable.

That was they’re slogan back in the day.

As mentioned many times I’m sure, I use my rpi’s as a pi-hole/VPN. It’s nice having them as dedicated devices for low power things, if my main server ever fudges up, my VPN still works and internal DNS is still resolved. If I’m not home and get complaints from the family that jellyfin isn’t working, I can either fix it remotely or wake up my dev server for them to use in the meantime.

I also have an rpi 1 as a “dedicated ssh machine” that I can ssh into in case all of my other machines have gone goofy. If for any reason my two main devices aren’t accessible, that one will be because if there’s power to the house it will turn on. It does literally nothing else, so there’s very little chance a power outage will corrupt anything. It does require that the pivpn device is working if I’m not home, but I prefer to leave that to it’s own …devices.

This one gave me the confidence to post my setup, I salute your bravery (°_°)7.

The best of luck with your future insurance claim.

Uggo = uptime

• Old Synology NAS for storage
• Optiplex 7060 running jellyfin, paperless, *arr stack, handbrake, ripper, maybe some other containers.
• NUC5 running nextcloud (nextcloudpi) baremetal and an audiobiokshelf container

I’ve done similar as well. My work gave me a real hard time with a grocery receipt, because there was a grocery store an easy walk from the hotel and I bought some deodorant or something along with some snacks and sandwich ingredients. It was maybe $30. My choices were don’t claim it or recalculate the cost without deodorant including tax from just the deodorant and write a memo detailing what meal(s) I was charging. I Also had to say why I wasn’t claiming certain meals (because leftovers, etc., I even had to have a meeting with the refund person because the company putting on the training fed us and I didn’t have receipts). After that I made sure I ordered as close to ~$43 as I could (meal plus 15% tip maxed out what I could claim) three times a day.

I also couldn’t order two appetizers or entrees without needing a memo and/or showing it was for the next meal because we couldn’t buy someone else food. Pizzas were never questioned beyond “you ate it all yourself?” though. I really like expensive pizza parlors when I’m traveling for work.

I would think that the power led would be on if there’s power going through the motherboard.

Are you referring to the power led or the disk usage led? I think on my nuc the only other led is the disk usage one, which looks like a soda can. The power led is always on, but doesn’t indicate standby or operating as far as I’ve seen.

It’s likely there’s another boot device that’s taking priority over USB, if USB is even enabled in the bios. I’ve had a few computers that try to pxe boot after internal drives, so it never went to usb until I futzed with the boot order to remove pxe. It’s likely not that you didn’t have an SSD in it, but that USB drives aren’t high enough on the boot list, or not at all. You could try finding what the boot selection key press is on boot, then blindly picking first, second, third option etc. to see if anything gets a hit (frantically press boot key during start up then hit enter after a few seconds, then reset and do it again if nothing happens after about 30 seconds, but hit down, then enter.)

deleted by creator

Not everyone can install mods

You gave a snarky response implying that there aren’t ads on Ubuntu and they replied with confirmation from a developer that they’ll be forcing ads on ubuntu.

Are you still arguing that canonical isn’t serving ads on Ubuntu? Or are you just being an ass because you were proven wrong?

I don’t keep a Swiss army knife set of distros anymore. I put tumbleweed on a USB. It’s rolling so I update it when I plug it in, then do what I need to do.

I used to have a USB with Ubuntu LTS and whatever the newest Ubuntu was. Then another would get something else that I needed/wanted. I always ended up wiping the drive and adding the newest release every single time. I was always out of date by the time I needed one of them for boot repair or something. This was also a time when persistence… Wasn’t very persistent. With tumbleweed I can install whatever I need and it’s there next time. I’m sure you can do the same with any other rolling release, but tumbleweed is in my opinion on par stability-wise with incremental distros. It’s my first grab whenever I need to check a PC. If I need another distro or boot USB, I can make it from this one with a second USB. I suppose the only thing I can’t do is make a bootable USB if the computer I’m on can’t access the Internet

That’s how these noodles are prepared, they’re run through cold water and served cold. The novelty here is it flows through a trough to you, instead of chilled out of sight and served.

I used both tumbleweed and leap for a bit and they really are good. I’m actually using tumbleweed on a home server right now and it’s been a champ. But…

1. My biggest gripe is opensuse seems to use different package names than any of the other distros for basic packages. I had to install a package that used capitals in the package name, and coming from mostly debian based distros, that made me rationally angry when trying to find the package I needed. I think it was network-manager or something that’s usually installed by default and I wanted something familiar.

2. Online directions for setting something up usually has deb and/or fedora rpm directions, which is usually just some difference in package names and the equivalent install command, searching the base package will let you figure it out. I had very few issues following debian/Ubuntu directions and translating them for fedora. Opensuse is always non-existent so you always need to translate those directions for opensuse, which is usually like doing it for fedora until you run into point (1).

That’s only after taking away all the toys they pulled out instead of doing anything to get ready for the last 30 minutes.