Didn’t know that exists, that’s pretty neat! However, not really what i’m looking for in this case, because i don’t want to use a device other than the printer itself. With scan to folder, you just set the MFP to scan something to an FTP, SMB or whatever folder. The ET-4850 unfortunately doesn’t support that, so i’m looking for an alternative…i could just run a Windows VM on my Proxmox and let that do the “Scan-To” stuff, but that’s pretty resource intensive… But the more i look in to it, it seems there is no solution (except a Windows VM) for this, as SANE only “speaks to the MFP” and the MFP can’t talk to SANE via WSD…

That’s none encrypted and i don’t really want to push some sensitive invoice data unencrypted to somewhere else…

For that, the PC has to be on. I’m using that as well, but that’s not really what i want it to do in this case. For example…i get a an invoice in the mail, i open the mail and the Epson is in the hallway downstairs, right next to the main door. I put an ASN/Barcode on the original document concerning the user paperpless should file that document under, scan the document and put it in the loose filing bin…etc. Basically, i do not want to have to use the PC.

https://en.m.wikipedia.org/wiki/Master_Quality_Authenticated

Basically trickery with alleged lossless, but it is not even close to lossless and you need very special players that can unfold MQA. Tidal got a lot of criticism for it and eventually switched away to FLAC…but the way they handled it was pretty bad and it still brushes me the wrong way.

I rather pay for the enshitification of Qobuz, than pay those crooks at Tidal any money. That MQA shit is still very deep and practically enshrined in my soul…

Yes, I did. But I couldn’t get my Homeassistant to work routing through it, so I switched back to Proxy Manager…

Basically, all of those https://www.qnap.com/en/how-to/faq/article/nas-recovery-guide-for-x86-based-nas There are some older models that can only boot from the DOM, however most newer ones (especially the AMD Ryzen ones, which i personally would highly recommend) have no issue. The early TS-X77 models do not boot from NVME, but that can be overcome with some creativity :)

You could do all that, yes - but that’s not really “replacing” a Synology IMHO. The point is that you don’t really have to think about putting it all together correctly - put the drives in, install your OS of choice and that’s it.

I’ve had a look and sadly, they are not available in Europe (at least for any reasonable price).

Does this have a backplane?

Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.

Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.

Do it anyway and put an x86 OS on one of the “standard UEFI” versions. There’s no other Hardware better on the market for this - even self build isn’t going to come close, there’s simply no case with 8 hotswap slots (for example).

QNAP x86, standard uefi! Can run anything. Been running mine with Proxmox, ZFS, Runtipi and others. Easy GUI setup for everything, Runtipi is just clicking add for various things.

I have a yubikey for the Bitwarden vault as second factor

In my “testing” at work and private, PVE is miles ahead of xcp-ng n terms of performance. Sure, xcp-ng does it’s thing very stable, but everything else…proxmox is faster

If you want things to just work: Chromecast with Android TV, plus PiHole or Adguard to pull out of all the telemetry and advertising (except maybe Amazon Prime’s new stuff).

Also, Google at least gives you the possibility to pull out of the personalized stuff and doesn’t work much with 3rd party advertiser’s. And those they work with are being taken care of with PiHole and Adguard.