• FireRetardant@lemmy.world
    link
    fedilink
    arrow-up
    19
    arrow-down
    36
    ·
    4 months ago

    IMO all the more reason to keep them. In the real world we all have to perform under pressure. With practice they can learn to read the clock under pressure, maybe take a breath or two and slow down before trying to read it. It may be a simple hurdle to overcome but practicing overcoming these things is important for development.

    • LesserAbe@lemmy.world
      link
      fedilink
      arrow-up
      22
      arrow-down
      3
      ·
      4 months ago

      You’re right it’s good to prepare young people for challenges. Still, that should mean challenges that would come up anyways, not artificially making things more difficult.

      It’s good to know how to read an analog clock, just like it’s good to be able to read cursive. But both of them are outdated and aren’t inherently required in day to day life. Inserting them into a testing situation that’s meant to test something else is creating an unnecessary challenge.

      • vrek@programming.dev
        link
        fedilink
        English
        arrow-up
        12
        ·
        4 months ago

        Not to mention the amount of analog clocks that are just wrong. I work at a fortune 500 company, most clocks are digital and synced to a time server. Every analog clock is wrong. Just yesterday I walked through the cafeteria and glanced at the clock and it read 5:20… For a second I panicked and was like it can’t be that late. I checked my phone, it was 3:06. The clock was just not set properly.

        • Scrath@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          1
          ·
          4 months ago

          There are radio controlled clocks which theoretically shouldn’t be wrong. At least as long as there isn’t a battery or motor issue…

          • ddh@lemmy.sdf.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            4 months ago

            How do you tell whether you’re looking at a radio-controlled clock though?

            • Scrath@lemmy.dbzer0.com
              link
              fedilink
              arrow-up
              3
              ·
              4 months ago

              Sometimes they have it written on the clockface. I don’t think that’s a general rule though.

              In the same way there are digital clocks that can be wrong too though.

      • FireRetardant@lemmy.world
        link
        fedilink
        arrow-up
        11
        arrow-down
        4
        ·
        4 months ago

        There are tons of equipment and tools out there that very closely resemble an analog clock and require the same skills. Pressure gauges for example. These skills are not out dated.

        • zourn@lemmy.world
          link
          fedilink
          arrow-up
          15
          arrow-down
          1
          ·
          4 months ago

          Except, a pressure gage reads the number it’s pointing at. Not 1 hand means the number it’s pointing at and the other means 5 times the most recent digit passed plus 1 for each tick mark.

          I’d wager that most people would never even see a pressure gage with two hands. Dual-indicating double-bourdon tube differential pressure gages are quite rare in the real world. Usually for that kind of application you’d go digital.

    • leisesprecher@feddit.org
      link
      fedilink
      arrow-up
      10
      arrow-down
      15
      ·
      4 months ago

      You on the other perform excellent in being abrasive, despite social pressure not to be an asshole.

      10/10 no notes.