Only use jellyfin. Have a list of things want to update… but it works for now.

Yes that is a laptop usb cooler used as supplemental placebo cooling. Also a pc fan I have propped up against the hard drive feeding into the pi.

Can’t recall last time used the ps4 or switch. But they’re there

  • masterofn001@lemmy.ca
    link
    fedilink
    English
    arrow-up
    15
    ·
    1 month ago

    Using phones with a continuous power supply might do nasty things to the battery.

    Source: I finally figured out how to open a glass back phone with no tools.

    • TrenchcoatFullOfBats@belfry.rip
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 month ago

      Heat, then suction?

      On a related note, I solved the battery issue with my wall mounted Fire tablet (for an HA dashboard) by connecting the power supply to a smart plug and setting up an automation to only give it the juice for about 3 hours per day, spread throughout the day

      • masterofn001@lemmy.ca
        link
        fedilink
        English
        arrow-up
        11
        ·
        1 month ago

        It still amazes me that the smartest phones aren’t yet smart enough to have direct power supply.

        Like my 40 year old AM radio.

      • SayCyberOnceMore@feddit.uk
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 month ago

        I’ve done similar with an old Android tablet. Installed Fully Kiosk Browser to display the dashboard AND read the battery level - above 75%, switch off power…

        But… automations only trigger when going past the threshold once, so if there’s a random issue where HA doesn’t see the battery drop below 10%, (had that happen a few times in the past), then I also have multiple triggers for 5% and 2%… to turn the power back on again 😉

        • TrenchcoatFullOfBats@belfry.rip
          link
          fedilink
          English
          arrow-up
          8
          ·
          1 month ago

          Yeah, the tablet runs Fully Kiosk and I tried the same thing with the battery percentage thing and ran into the same issue, so I just simplified and made the automation time-based.

          The tablet also likes to freeze a few times a day, so I also created an automation that toggles the smart plug power whenever HA loses connection to the tablet for more than 5 seconds, then toggles back to the original state at the start of the automation, which corrects the problem. Until the next time. But hey! It was only $60, so it’s fine.

          • SayCyberOnceMore@feddit.uk
            link
            fedilink
            English
            arrow-up
            1
            ·
            29 days ago

            Ah, good call on using the power to get the tablet to respond… I don’t have that problem (tablet freezing), but it does drop off the wifi sometimes.

    • pat277@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      ·
      25 days ago

      For what its worth, some Samsung phones can stop charging while the plug is in, while also not disconnecting anything on a USB dock (such as internet)