Thermal expansion is proportional to temperature; it’s quite significant for ye olde spinning rust hard drives but the mechanical stress affects all parts in a system. Especially for a gaming machine that’s not run 24/7 - it will experience thermal cycling. Mechanical strength also decreases with increasing temperature, making it worse.
Second law of thermodynamics is that heat only moves spontaneously from hotter to colder. A 60° bath can melt more ice than a 90° cup of coffee - it contains more heat - but it can’t raise the temperature of anything above 60°, which the coffee could. A 350W graphics card at 20° couldn’t raise your room above that temperature, but a 350W graphics card at 90° could do so. (The “runs colder” card would presumably have big fans to move the heat away.)
That is fundamentally not how PC cooling works. Each part is a closed system, with the PC an open system so long as you have fans. The heat sink temp over ambient could be what you are looking for, but that still would not work that way if you are looking at hot spot temps. If you tried to run a thread ripper at 500W in a closed space the air temp would end up hotter than than a 350W Graphics card. But the CPU if not throttling would have a temp over ambient of about 30c and the gpu core would be about 45c over ambient. The effect on your room will be that the 500W cpu raises the ambient temp more than the 350W gpu over the same period of time. The air in your room is what is cooling the components. Air at a given humidity has a specific heat capacity and will be your limiting factor. With your bath example you would need to have a much larger capacity of 60c water to melt the ice since the specific heat of water doesn’t change when a liquid.
You have a fundamental misunderstanding of the 1st law of thermodynamics and what a “system” is as relating to the 2nd.
For your HDD you want them to run 45-60c. running them colder will impact their life span. The drive will try to heat up if under 30c to prevent damage.
Temperature is meaningless unless you want oc headroom. A watt into your room is the same no matter the temp the part runs at.
That’s not correct, I’m afraid.
Thermal expansion is proportional to temperature; it’s quite significant for ye olde spinning rust hard drives but the mechanical stress affects all parts in a system. Especially for a gaming machine that’s not run 24/7 - it will experience thermal cycling. Mechanical strength also decreases with increasing temperature, making it worse.
Second law of thermodynamics is that heat only moves spontaneously from hotter to colder. A 60° bath can melt more ice than a 90° cup of coffee - it contains more heat - but it can’t raise the temperature of anything above 60°, which the coffee could. A 350W graphics card at 20° couldn’t raise your room above that temperature, but a 350W graphics card at 90° could do so. (The “runs colder” card would presumably have big fans to move the heat away.)
That is fundamentally not how PC cooling works. Each part is a closed system, with the PC an open system so long as you have fans. The heat sink temp over ambient could be what you are looking for, but that still would not work that way if you are looking at hot spot temps. If you tried to run a thread ripper at 500W in a closed space the air temp would end up hotter than than a 350W Graphics card. But the CPU if not throttling would have a temp over ambient of about 30c and the gpu core would be about 45c over ambient. The effect on your room will be that the 500W cpu raises the ambient temp more than the 350W gpu over the same period of time. The air in your room is what is cooling the components. Air at a given humidity has a specific heat capacity and will be your limiting factor. With your bath example you would need to have a much larger capacity of 60c water to melt the ice since the specific heat of water doesn’t change when a liquid.
You have a fundamental misunderstanding of the 1st law of thermodynamics and what a “system” is as relating to the 2nd.
For your HDD you want them to run 45-60c. running them colder will impact their life span. The drive will try to heat up if under 30c to prevent damage.