George Takei

Do they? I wouldn’t know, the only racists I’ve ever met were conservatives. Dems at least try to pass laws beneficial to everyone and not just rich white folks. But Liberals? No clue, I don’t pay much attention to them.

Sorry, I wasn’t looking at it in terms of just the senseless loss of lives, but also how much damage was being done at home. Yeah there’s a lot of hard lines there to cross but Trump has made a policy of tearing the nation apart instead of trying to bring people together, and that weighs a lot to me.

I’m still on the fence about W. just because he didn’t really do anything on his own, he just took the excuse to continue his daddy’s war. I think if Sr. had gotten another term in office he would have ramped things up, but either way I think the family as a whole pushes up there on the list.

For the rest of the list… yeah it’s not hard to find a lot of presidents who have killed a lot of people. However the original question was about the worst president overall, which to me includes the damages done here at home. Trump is high on my list simply because of how far back he has set us in terms of equal rights, moving beyond the pettiness of racism, dealing with important things like the unfolding climate disaster, and his nonchalant attitude that Palestine and Ukraine need to just surrender because being in the news cycle is inconvenient to him. Looking at Trump’s agenda of just how much he wants to destroy things here, I find it concerning that the only thing stopping him is a few Republicans that still have a moral compass.

What’s wrong, snowflake, are you triggered by this conversation? Don’t worry, if his cabinet succeeds in their plans to eliminate vaccines and shut down life-saving agencies such as NWS, you’ll get to see genocide at home. And even though he hasn’t eliminated the department of education yet, there’s a chance you may already be one of the victims of the conservative agenda.

I wonder if anyone ever pointed out that the lettering on the door should actually be forward, since it would be reversed as you see it through the glass in the door, but then reversed again by the mirror?

I haven’t watched the video, but when I was younger I started developing an intolerance. I always eat a bowl of cereal in the morning, and at that time, about an hour later while I was driving in to work I started getting gut-wrenching cramps every day. Stopped eating the cereal and it immediately went away. That was all fine & dandy, but after several years of not eating breakfast at all I decided to hell with it and started working on it again on the weekends. However I’m guessing something else must have also changed because it didn’t really take that long to get back to eating it regularly again, and I haven’t stopped since.

I have four more years to pay off my house. I just have to survive the Trump administration without losing everything.

Wow, how are you retiring at 55??? I’m 56, and have spent this year re-vamping my IRA accounts with the hope of retiring in 10-12 years without any reliance on the social security that will be gone.

[Edit] I see below you mentioned having a pension. Must be nice!

Honestly I’m not really sure about that. What I’ve seen on the idea of damage to children usually has the caveat of “more study is needed”, but of course nobody wants to subject children to such a study on purpose. On the other hand, I haven’t seen any studies yet that concluded long-term use in adults would cause any permanent damage. I suspect there could be outlying cases of extremely heavy usage but in moderation it so far appears to be perfectly safe.

The current belief is that it can affect the brains of growing children, but they’re not sure to what extent. In my state the legal age is 21, the same as for drinking. In adults, straight cannabis will not harm you in any way other than the usual effects of being under the influence and not always making rational choices. Worst case, you sleep it off. Do keep in mind that smoking it can slowly damage your lungs, the same as breathing any find particulates over a long period of time. I personally prefer edibles for long-term use, but the baking process does reduce the potency.

Now, like any drug, the reason you want to take it can be very important. If you need something to escape reality on a permanent basis, obviously you have a larger problem that no drug is ever going to solve. However the occasional evening can be quite entertaining, much like a trip to the water park. Other people (like myself) take it on a regular basis to help with medical problems, usually pain relief or sleep issues, where CBD is the answer rather than the THC component.

For myself, I’ve had sleeping problems for the past 16 years (since a bad car wreck). I worked with my doctor for awhile trying to find something that would help. The problem is, I’m a computer tech and I need my mind sharp for troubleshooting or writing code. All the prescription drugs leave your brain in a fog through much of the next day, and then what use am I? It turns out that marijuana has a fairly quick drop-off, so it can provide help through the night, and is pretty much out of my system by the time I head for work. As with anything, it takes some time to find the right dose. I take it along with other prescription medications to address different issues, but I’ve been getting good restful sleep for the past 9 years and feeling much more like myself again. For these purposes I highly recommend it, but talk to someone knowledgeable to guide you to the right strains and give advice on what to expect.

Yeah I figured there would be multiple answers for you. Just keep in mind that you DO want to get it fixed at some point to use the disk id instead of the local device name. That will allow you to change hardware or move the whole array to another computer.

Are you sure about that? Ever hear about this supposed predictable network names in recent linux versions? Yeah those can change too. I was trying to set up a new firewall with two internal NICs plus a 4-port card, and they kept moving around. I finally figured out that if I cold-booted the NICs would come up in one order, and if I warm-booted they would come up in a completely different order (like the ports on the card would reverse which order they were detected). This was completely the fault of systemd because when I installed an older linux and used udev to map the ports, it worked exactly as predicted. These days I trust nothing.

OP – if your array is in good condition (and it looks like it is) you have an option to replace drives one by one, but this will take some time (probably over a period of days). The idea is to remove a disk from the pool by its old name, then re-add the disk under the corrected name, wait for the pool to rebuild, then do the process again with the next drive. Double-check, but I think this is the proper procedure…

zpool offline poolname /dev/nvme1n1p1

zpool replace poolname /dev/nvme1n1p1 /dev/disk/by-id/drivename

Check zpool status to confirm when the drive is done rebuilding under the new name, then move on to the next drive. This is the process I use when replacing a failed drive in a pool, and since that one drive is technically in a failed state right now, this same process should work for you to transfer over to the safe names. Keep in mind that this will probably put a lot of strain on your drives since the contents have to be rebuilt (although there is a small possibility zfs may recognize the drive contents and just start working immediately?), so be prepared in case a drive does actually fail during the process.

That is definitely true of zfs as well. In fact I have never seen a guide which suggests anything other than using the names found under /dev/disk/by-id/ or /dev/disk/by-id/uuid and that is to prevent this very problem. If the proper convention is used then you can plug the drives in through any available interface, in any order, and zfs will easily re-assemble the pool at boot.

So now this begs the question… is proxmox using some insane configuration to create drive clusters using the name they happen to boot up with???

I’m curious, what part of that do you think will be good for anyone who isn’t a rich which male?

I agree with the wait-and-see approach, but I also know how much damage he did the first time around even without a lot of support. And the amazing thing is that people still think the economy was better under Trump (who barely managed to coast on Obama’s success) than it has been under Biden (who managed to turn around a global economic disaster after COVID). This time it’s all going to be on Trump, and we’re all going to suffer from it.

Unfortunately Trump’s stated plan is to boot out everyone who won’t kiss his ass, shut down “non-essential” services like the education department or national weather service, put someone in control of healthcare who believes all vaccinations need to be immediately banned, and pass national laws against women’s reproductive health care despite his claims of letting each State handle their own business. And yes, on his own he could only do so much, but the Republican party also gained more seats in both houses of representatives which means it will be easier to steamroll through anything he wants. So yeah, we have many many good reasons to be worried.

One promising item I found are some json files from Reuters…

This one provides info on the candidates and the key for state ID’s: https://graphics.thomsonreuters.com/data/2024/us-elections/production/events/20241105/metadata.json

This one seems like it will provide the ballot counts(0) and possibly any declared winners(1): https://graphics.thomsonreuters.com/data/2024/us-elections/production/events/20241105/summary-votes/president.json

Of course I won’t know anything for sure until tomorrow evening when states start releasing their counts, but I went ahead and wrote up some code to use the files. It’s something at least, and the Reuters data should be fairly timely. I hope to play around with the collected info in real time, then maybe next election I can re-use the same code.

Yeah I found the same on the AP data. I also found that reddit thread, but haven’t been able to find a valid URL for this year’s election. Maybe they don’t make it available until voting starts?