For example, I’m incredibly confused about how you’re supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it’s side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can’t see what you’re doing cuz the bag is in the way. Like what the heck who’s idea was that?
I have a truck where the oil drain plug is directly over the axle. I have to strap an offset funnel under the drain to get it to not splash all over the fuck, and of course, it’s not easy to get that stay put so inevitably I have oil everywhere. Same truck has the oil filter tucked up where I need a special oil filter wrench with a ratchet and extensions to remove it, and when you pull the filter out, you have to tip it so it spills the oil inside everywhere.
I had an idea a long time ago of a website where you can crowdfund a private investigator to find engineers that do shit like this, and a crew to go over to their house and beat them halfway to death.
Cars are designed by people who don’t do maintenance themselves.
About cars, and not necessarily designed poorly, but definitely designed by a man for men: cars that, by default, automatically, immediately unlock all doors when the engine is turned off. A man might be car jacked or robbed, a woman might be car jacked, robbed, or raped.
(Of course men can be raped too, but it’s not as likely to happen by a strange woman threatening violence than a woman is to be raped by a strange man threatening the same.)
Wat?
designed without thought to abnomal situations, when designing ot to handle them better would require almost no extra effort.
If we’re also talking about vehicles… I’m about average height (~180 cm) but have long-ish legs, and this means that I simply don’t fit well into the driver’s seat of most cars. Even with the steering wheel adjusted all the way up, seat slid all the way back and reclined all the way forward, my legs are hitting the steering wheel and yet I can barely reach it with my hands. Because of this, I sometimes have to take my shoes off while driving.
Also, almost every car has some annoying things like your oil plug; simply because a modern combustion engine is really quite complicated and there’s not enough space under the hood to give every component a convenient place. E.g. my Delica has the starter located below the engine and quite far back, so it’s mostly covered by the engine protection plate. Good luck banging on that starter relay if it sticks in the off position and refuses to start, while you’re stuck in the mud! However I do agree that making periodic maintenance painful, like in your case, is way worse.
Had an old Isuzu truck that to start, I sat in the drivers seat with the passengers seat up exposing the engine. Had a long steel rod that I would feed down thru the motor and bang on the starter motor while cranking the keys.
Sometimes it started straight away, sometimes it took 5 minutes of banging to get the pig to fire. Good Times.
Woke one morning to start work, went to hop in and saw someone smashed the drivers quarter window. Reckon they tried to start it but must have assumed it had a kill switch.
Pity they didn’t steal it, as the insurance payout would have been way more bucks that it was worth.
Oh, there’s a few engines like the Northstar and the Toyota 5.7 where the starter is actually under the intake manifold, effectively inside the engine. The amount of stuff you need to take off to even see the starter would make your eyes water.
I learned long ago when something like this bothers me that it is irrational to get angry at objects, then I connected I am not angry at the object, I am angry at the dumb ass turd who designed it.
btw, I drill a hole in my oil filter before I remove it to drain it so it doesn’t spill all over the front of my engine.
Maybe all engineers should have to sign their work. Like have their license number or something embossed on it. That way we can find them and inform them of their idiocy.
I will often drive a screwdriver into the bottom a filter, but this one is impossible to get to and even if I did, it would dribble on the exhaust pipe.
US can openers. In other countries, they cut the sides of the can not the top, so the lid has no chance of falling in while dulling the edges. It also allows them to be much smaller and easier to use.
I can’t find anything that matches your description of US can openers on DDG, do you happen to have a pic? Can’t picture it
Second one in the video on the page I linked in my comment.
I don’t know what “other countries” you’re talking about, but where I’m from, a “can opener” looks like this:
(I’ve been using one just like this for my entire adult life, and guess what - it’s ok!)
I bought this can opener after watching a Technology Connections video, and I kinda love my can opener.
Thats seems similar to what I’m talking about. Like the second one in the video on the page I linked.
Same. I should really learn to use a simpler one, but I love this model and it still seems rock-solid to me after years of use. The best part is not ending up with sharp, dangerous edges on the lid!
You can buy good can openers and bad ones in any country.
Came here to say can opener too. Not for the same reason as you mentioned just that more often than not a can opener is just plain shoddy. Slips, doesn’t fully cut, hard to grip, etc….
There are many, but my current bugbear is the wireless Apple mouse. It has a built in rechargeable battery and and a tiny little port for you to plug the recharging cable in. The port is mounted on the bottom of the mouse rendering it useless while it’s being charged. I guess it’s to make it look nicer but it’s so stupid.
Planned obsolescence. When the battery finally dies, you can’t use it wired.
That was a design decision by Steve Jobs to keep people from using them as wired mice.
If this is true what a dumb reason. Basically decided to make a device that could be used 100% of the time unusable for some fraction of time just because it looks the way he wanted it too.
It’s like that to push you to buy two of them.
Alec from Technology Connections is known for his extensive rants about household appliances: https://www.youtube.com/@TechnologyConnections
As for me, I’m just trying to avoid things in general, and things I don’t enjoy in particular. Perhaps the only things that I find annoying at my home are:
- An awful flow-through gas water heater, which requires me to wait for like a minute before water gets up to temperature every time I need hot water (I’d go with an electric one myself, but unfortunately I’m a renter for now). It’s also a poor design because it’s going to fuck over humanity in a couple decades via climate change.
- Packaging on almost all processed food. I don’t need everything I buy to be in a plastic bag. It’s an incredibly poor design because it is almost always non-recyleable, either because it has a thin foil layer or it’s a mix of plastics or both, filling the landfills forever and contaminating everything with microplastics.
- Poor window frame design, combined with inevitable building settling, has resulted in a cracked window twice within the last year.
I have many more gripes about things, some of the most prominent:
- Most modern smartphones just suck. Gimme back the headphone jack, an SD card slot, and a back that I can open with my fingernails! (thankfully my current phone has all of those despite being only a couple years old and very cheap)
- Generally everything that has a battery which I can’t replace
- Bluetooth headphones without a headphone jack or at least audio-over-USB are an awful design, it would cost the manufacturer like a dollar do add that functionality that can come in really handy and yet they don’t
- Fuck clothes without pockets!
- Cheap plastic crap from wish.com or similar that’s designed to fail after one use, it just shouldn’t exist. I hope CPC bans this shit soon. (although I find it fun to pull out broken christmas lights from recycling, fix them and then get free christmas lights for every New Year’s)
- “Teflon” or similar frying pans. Just get a cast iron one. Lasts forever, doesn’t poison you, also allegedly enriches your food with iron
cups, glasses, bowls, anything that doesn’t have a spout and makes a mess every time you transfer liquids
Every time I spill something I’m reminded how much better lab glassware is (beakers etc)
Garlic crushers. All of them suck.
Buy jarlick. Join us in convenient garlic-in-a-jar nirvana.
Keep looking. Find one with a thick stainless steel construction. I have two that you could break a window with.
I switched to using a microplane (or similar super fine grater) for garlic a few years back, it’s far easier to clean and I like it for ginger, nutmeg, hard cheeses etc.
I should get used to that with my grater. I either press with huge amounts or just do the old smash and rapid micro slice.
Our president
When I was a kid cereal didn’t have no zippas! We rolled up the one end of the bag and watched it partially unfurl when we let go, and we were satisfied with that.
Roll the bag. Flip the box upside down. Put it in going up. Hold it in place and flip the box back over. Gravity holds the bag closed. This is a bad idea if anyone else accesses the box and isn’t on the same page as you.
I just fold it up and use a clothes peg ha ha
Y’know, I bought a bag of bag clips from Ikea years ago and I’m only now realising that they’re less suited to the job than a clothes peg. Smart.
How do you hold closed the bag that holds the bag clips?
Stupid question. With a bag clip bag bag clip, obviously.
Laptops with no intake dust filters.
Actually, no, any computer with fans that doesn’t have a dust filter is a terrible design.
My laptop doesn’t have dust filters, but the fan almost never runs anyway. Like the heatsink is way overbuilt for the CPU it’s attached to. It’s actually quite nice. I’ve never seen it hit 70 degrees. I’ve cleaned it maybe three times since 2016. It really only spins the fan up when I’m watching 60 fps YouTube videos or playing games. And even then, it kicks hard for a very short time and shuts off again.
And again, I bought this thing nine years ago. It’s just a little Acer. And it’s not even a nice one. I paid like 500 bucks for this thing.
Now, my wife’s MacBook that she games on…yeah, I need to figure out how to get the back off so it can get a proper dusting. Fuck you, Apple. Let me work on my stuff, dammit.
A twelve year old computer in 2013 would have been utterly useless. Doesn’t matter how good is was in 2001 it would die under even a modest 2013 workload. But a decent computer from 2013 is still useful today. Not for triple-A gaming, VR, or 8K video editing, but still a decent productivity and media machine. I just bought my first handheld gaming PC and I made sure it had eGPU support since that’s the likely bottleneck in the future (i7 and 32GB RAM, so that should be good for a long while) and I fully intend to get a decade out of it. There’s no real appetite to upgrade your machine regularly any more, and the manufacturers hate that.
Yeah, why do people blow their noses into PAPER when you can just go to the bathroom sink and hork in your hands, and then wash up afterwards??? Why would people walk around with dried boogies on they face when they can wash?? Why? Why, Mister Anderson, why, why?
Because it is not always possible… Also, take your time to clean the sink afterwards or you might get in trouble with you SO (I am speaking out of experience).
It’s probably habit, but it just feels somehow wrong to blow my nose without a piece of paper snugly against my nostrils. Like trying to poop without being seated on a toilet bowl.
Just tell me that you turn the water on pre-hork instead of touching the fixtures with hork hands, and I’m totally fine with your suggestion.
Of course! You need the hork-lube to do it right
OMG I thought I might be the only one!
I do this too and it drives everyone nuts but it’s so much better!
Only thing is sometimes I miss a snot rocket that goes astray.
Me
For example, I’m incredibly confused about how you’re supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it’s side, so if you measure it with the cap it just leaks everywhere and makes a mess.
After pouring the detergent into the appropriate receptacle, toss the cap in with your laundry to be washed like everything else. No mess.
Kitchen sinks. Instead of doing the dishes they just let them accumulate!
Shower curtains
Any time there’s a ready meal from the supermarket and for some reason the adhesive is way stronger than the plastic film. You end up with loads of bits of film just sort of stuck to the rim of it. Super annoying.
The glue gets weaker when it’s heated. They use the same film for oven meals as well. It comes off fine when you finished heating, but it’s a pain in the arse when cold.
I’ve dropped brands for that shit
Got a local one that puffs up to like 3x height in the microwave though and that pulls off a lot of the adhesive.
