The guy with a truck had a concept of a plan
You all laugh, but one time I was young, dumb, and just did what people told me to do.
In this regard, I found myself pulling a grain auger on a much-too-small flat deck trailer. The trailer was maybe 10ft long by 6 ft wide, so we put one wheel of the grain auger on the deck, and one on the external tail light of the trailer which was relatively sturdy. ‘are you sure this is a good idea?’ ‘fuck it, she’ll go. Just go slow’
So I start driving. No immediate problems. Turns out that going down a major, winding hill at the 100 km posted speed limit is not a good idea with an awkward load. It’s also a pretty interesting time to figure out that if you brake, you make the trailer sway worse. Hmm so speed up it is! Started at the top of the hill at about 90 km/hr and came out for it at about 120 km/hr. Lol.
And that’s just one of the times I shoulda died! Whee.
This is also why I mentor the fuck out of any junior I work with. too many stories like this.
I’ve also got a story of other people saying “it’ll be fine” while I should have been thinking for myself.
I used to be a garbage truck driver. I was sent to pick up a bin at some fishing club. It was at the end of a dead end road. I drove my truck to the end hoping there would be enough room to turn the truck around. Of course there wasn’t. That’s when I should’ve just decided to back out, but I didn’t. I asked the members of that club if the garbage truck usually turns around or backs out. They said “sure you can turn it on the grass, they do that all the time”.
So I started turning, one small moment later, I was stuck in the grass. My back wheels just kept slipping and digging in deeper. I putting gravel and wooden boards under the wheels, but nothing really worked. In the end we got like 6 of the fingers to push the truck (10.000+kg) out of the grass… and they fucking did it! It took a little back and forth, but we managed to get the truck out with teamwork.
It was a pretty stupid decision of mine, but I learned from it. It was 10 years ago, but I still remember it well,because it was just and awesome experience of teamwork and humanity.
6 of the fingers
I don’t get that term in this context. What’s a “finger” here?
autocorrect of fisher I assume.
Yes, I have a new phone and the autocorrect is the worst. I’m trying my best to tame it, but it just sucks
Fish finger?
I keep looking at it wondering … Why? The others are common. The truck, however took a little special reasoning.
Underestimating the bed rail loading. I’d love to make a Ford joke, but let’s be real, all truck beds would crumple like that.
deleted by creator
The truck one is one of the only ones that I know is real cause I have seen that photo before.
Don’t know what level of compression they went through to make the photo look like that but it didn’t always.
deleted by creator
Once again the minivan heavy portfolio pays.
*The damage to the drywall was like that from the store it was 75% off and being used to make some patches and fill a small renovation.
Not only did I haul drywall home in a minivan, I even had the foresight to buy a couple of 2x4s to act as rails to slide it on so the edges wouldn’t get chewed up by the rounded rear hatch opening.
Have a camper minivan, and have on a number of occasions pulled the cushions out to haul.
I worked at home depot, and our manager made people sign a form before having a Hi-Lo load a pallet of floor tile into their truck because it would cause their suspension to bottom out. They’d do it, and drive off with zero leeway on their shocks.
We had one guy come in bragging about how his super-expensive hydraulic suspension could handle it. We loaded 2 pallets of tile into his truck bed. I bet he felt every little crack in the road driving to the job site.
You do feel every little bump and odds are your suspension will never be the same afterwords. But that’s why you do it with beater trucks and not anything you actually care about. My dad did the same thing except with landscaping blocks in an old salt truck he picked up for like $200. You can’t break a suspension that’s already broke.
Or that’s the theory anyways. In reality he wound up blowing the same rear tire 3 times on the trip home. Four times if you count the tire blowing again after the truck was parked. We kept having to pull over, dismount the tire, take it home, mount another used tire on the rim, take it back to the truck, and put it back on, and go until it blew again. Every time we had to do that I reminded him that I had told him before hand that he should bring the trailer.
People that make memes and don’t spell check is my least favorite genre
Based on the top two “photos”, they must have just got done typing “generate” a few times, so I guess I can see how the error might have occurred.
Elsewhere in the thread someone shared one of the originals where text that’s mucked up in the above meme is clear as day. The crazy artifacting must come from some bizarre compression or automated touchup by an editing software. Maybe automated upscaling?
A lot of times bad spelling and grammar are both engagement bait ploys. People can’t resist clicking to make comments about it.
How do you feel about punctuation?
I can take it or leave it
Fair, enough
I think they spelled “genera” correctly, but there’s no reason to use the plural here
I thought they meant to use “genre,” which makes more sense because who calls a type of meme a “genus?”
I dunno, Richard Dawkins?
Be the change you want to see in the world
Details.
Maybe they have gonorrhea?
See also: people struggling to fit IKEA packages in their vehicle.
Bonus: while the cursed, multi-directional-wheeled carts roll out from under them.
I prefer stuck mining equipment tbh
They will rent you a fucking truck, it isn’t that expensive either.
in my experience, it’s better to fuck in a van.
Really it depends. Truck fucking can be way more fun, if you can find somewhere to bend over the tailgate while getting railed. It’s really quite exhilarating. But if you’re in the cab, van is definitely better.
Like $20 for the first 90 minutes. Makes it very affordable to not own a truck for the few times a year you might need to haul something home
Rented the biggest truck they had at home Depot.
American trucks are so shit that it still wouldn’t fit the small length of lino I had cut for my bunny room.
Shoulda just tied it to my little car and saved the 70 bucks.
The store nearest me will deliver whatever you want for a $30 flat rate. I have a minivan so I can still carry a lot of stuff myself but for that price it lets me avoid messing with removing my seats so it’s worth it
Genera?
Genre.
it’s very much ai,
generation?Have, you lost Ted?
Pretty sure that’s Italian for genre. Or a weird typo/autocorrect error/both 😁
deleted by creator
nope. it’s the plural.
The plural of genre is genres. The singular of genera is genus… Which might make sense here, but not as a plural.
Nope. Its genera in this context because they are discussing it as species.
They are pluralizing genus. Its a reference to it being a new “species” of image.
Your assumption of the word they are pluralizing was wrong.
Still wrong because they are refering to an individual “species” of image, so it would be genus not genera.
`Plural of genre. Still should have been singular “genre” though, unless there are multiple genera of these images.I was thinking of “genus”.
I think the word genre comes directly from the french word (“genre”, meaning “type”), which in the plural form is “genres”. I don’t think “genera” means anything, it’s probably a typo
“Genera” is a plural form of “genus” (i.e. also “type,” but in the fancy scientific sense used in taxonomy).
Derp, that’s what I was thinking of.
They apparently couldn’t be bothered to to type out
Generated?
Yeah…no it isn’t.
Imagine buying truck just for this moment and then screwed up the loading part.
Best part is, there’s a hitch on the back, so buddy has used it with a trailer, just not this time when it would have been the ideal solution
I bought a locker a while back, like the kind you would find in the employee room of a closing bed bath and beyond. It didn’t quite fit as expected so we ended up just tying the back hatch as closed as it could with a single rope and took back roads the whole way home. I don’t think we went above 20mph for fear of the damage this giant steel box would cause if it fell out. Also got a tetanus shot the next day because I managed to rip my hand on its rusted foot. Good times, I love that locker
Go to the Netherlands and see the same thing, but with bikes. I once brought back a 1,5 meter long wooden pannel under my arm. I didn’t anticipate the wind, which started to push me out of the road.
Believe me, those folks with the small cars had a plan. They just got carried away. Always amazed at what I can get into my Yaris with a little creative thinking.
I loaded a deck joist into my Scion tC when I realized one of mine was rotten (while replacing the boards). I put it through the sunroof into the “trunk” (it’s a hatchback) and drove home like a majestic blue unicorn. It was beautiful.
Got home and my neighbor said, “You could’ve asked!” while gesturing to his pickup truck.
I said, “I wanted to see if it would work!”
I got carried away with a 2004 Chevy Cavalier coupe at Ikea like 15 years ago. I bought a bedframe, nightstand, dresser, and a couple cheap wood chairs.
And then I saw a small cheap couch and decided to grab it impulsively on my way to checkout like it was a pack of gum or something.
I got everything except the couch to just barely barely fit, and I started looking at that huge box for the couch and thought “have I lost my mind” and had to go back in and return it right then and there
/r/miatalogistics
I’ve carried various 6-10’ pipes and poles sticking out the passenger seat of my Miata. Infinite vertical space! lol
We got the 12 ft skeleton into my wife’s Honda Fit. I mean, the box wouldn’t fit so the employees helped us load every single piece in, but we got it all in!
That is not limited to Home Depot. I once saw two ladies trying to fit three trollys full with an IKEA bedroom (bed, frame, mattresses, and a stack of PAX wardrobes, plus a heap of smaller items) into a compact car. A very compact car…
I didn’t see anyone link to the original!
The sleeping face tied up in twine is iconic
It’s great having a work van.
Your not putting a stack of sheet in the back of a van.
Yea you are? Sprinters or Crafters easily fit a stack of sheets, at least in the EU they do
I’m honestly baffled as to where they got that idea, most commercial vans are built around standard pallets and wallboard sheets. Mercedes Sprinter and Vito will, the Transit including the Transit Custom will, the Toyota Hiace will, it’s pretty much a standard feature.
Not with that attitude.
As in plasterboard sheets? I don’t see why not if hand loading, plenty of vans will fit a 2400x1200 sheet (my Transporter fitted a bunch of plywood with room to spare). Loading one with a forklift is harder due to no side access long enough to fit 2400mm but that’s a problem shared with tub back utes. If however your plasterboard pallet is side accessible a van with barn doors (like you’d buy if pallets were a priority) will allow you load it in fine.
What van are you thinking? Work vans do this all the time.
Most commercial vans are slightly over 2.4m long in the cargo area, which is the size of a standard sheet of wallboard. (1.2x2.4m).
Mine will fit that comfortably.
My pickup can fit that with a forklift in seconds without hand loading… Can your van…?
Can your pick me up fit into a standard car park in the middle of a city?
And a van with split doors is definitely capable of doing that.
Actually yes my ranger fits just fine in some of the tightest of places. Never had a problem fitting into compact car spots with no over hang. With a full size 8 foot bed no less.
We have seen it on the picture above.
That’s an example of an idiot. And not how you load that.
That’s an example of an idiot.
Precisely, sweetheart.
cupcake if you think that’s how I’m loading that into my truck you’re the idiot
Did you know there’s actually space between the wheel tubs in the bed of that truck to set those boards down flat. And if your object is still a little wider than that you stack a couple of pallets underneath it to build up to level with the wheel tubs and then load it on top of those still within the bed rails and sides and wouldn’t necessitate having to try and do a side load like this. where your loading over the side you use a sling and don’t just use boards like a fucking idiot.
deleted by creator
I don’t actually think a single of these photos are AI generated which is insane.
I was in college and needed to fix my apartment. I didn’t own a car and took the bus to Lowe’s. I called my buddy who had a car.
I’m in this picture.
I’m glad you made it ok! This one looks really dangerous for the people.
deleted by creator
I’m leaning towards real, there’s signs in the background that have coherent text on them, instead of weird, unintelligible, almost-letters.
I’m leaning real too, the one where the guy destroyed his truck bed by ratchet strapping whatever that is to his wheel well is literally in the HD parking lot and that’s exactly what would happen if someone was stupid enough to try it. But the first one with the “Mazda” logo in the background, that one looks fake as hell, so I’m torn lol.
I really hope AI continues to have noticable failures. I have my doubts, but one can hope.
And this one makes absolutely no sense because a single search gives you hundreds of these pictures. It took more effort to generate these than to find them.
In genera, i think this is a pretty good comment.
