• Wahots@pawb.social
    link
    fedilink
    arrow-up
    0
    ·
    1 day ago

    You will never clog a toilet if you get a bidet. Putting tons of TP in is how you get clogs.

  • Goretantath@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 days ago

    Literally all i have to do is use the toilet brush and freneticly plunge it. Works every time.

  • Dave.@aussie.zone
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    2 days ago

    Australian here.

    Step 1: design your damn toilets so they do not clog.

    Step 2: there is no step 2.

    Seriously, half a century of toilet use here in Aus and I’ve never caused - or discovered even - a blocked toilet at home.

    Clearly the fact that I can buy a toilet plunger from the local hardware store indicates that this can happen here. But it seems that every American household has a toilet plunger and poop knife on standby and many articles are devoted to what clogs, and how to unclog, American toilets.

    There are better designs for both toilets and plumbing out there guys, maybe you should look into using them.

  • notfromhere@lemmy.ml
    link
    fedilink
    arrow-up
    0
    ·
    2 days ago

    Step four, you want to pull the fluid column up to unstick the trash, so go slow ‘down’ and somewhat more forceful on the ‘up’.

  • saltnotsugar@lemm.ee
    link
    fedilink
    arrow-up
    0
    ·
    2 days ago

    A cheap method to unblock anything:

    • Remove any loose material.
    • Now pour 30 gallons of jet fuel in the area.
    • Ignite it but stand back at least a few feet.
  • Signtist@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 days ago

    I’ve never had a problem starting on step 4 and repeating a few times.

  • Hikermick@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    2 days ago

    There is always the possibility the clog isn’t in the toilet itself but further down the drain. You can test this by running faucets and seeing if the sinks drain properly

  • moody@lemmings.world
    link
    fedilink
    arrow-up
    0
    ·
    2 days ago

    My plumber told me never to use a plunger in a toilet, and to use a snake instead. The back-and-forth motion from using the plunger can damage the wax seal and cause a leak.

    • Apepollo11@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      2 days ago

      I’m guessing it’s to break down the fat / grease in the poop.

      The hot water will speed up the reaction, with the added benefit of possibly expanding the pipe just enough to make a difference.

      Just a guess, though!

    • Jrockwar@feddit.uk
      link
      fedilink
      arrow-up
      0
      ·
      2 days ago

      I’ve had success with just dish soap - it makes blockages “slide” more easily.

      In the last flatshare I lived, I had a particularly annoying combination of a slow toilet and a flatmate incapable of solving any blockages. Whenever I’d see that, I’d go “fuck this”, squirt a silly amount of Fairy in the bowl (I’m talking like 100 ml at least) and usually the blockage would resolve itself overnight.

  • WhatAmLemmy@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 days ago

    Note to Australians. Your sewerage pipes are double the width of the USA’s weak, inferior pipes. You may never need a plunger in your entire life.

    Also, wet wipes are NOT flushable ANYWHERE, and if we didn’t live in fake democracies ruled by corporations any company that labelled them as such would have been sued into bankruptcy decades ago.

    • overload@sopuli.xyz
      link
      fedilink
      arrow-up
      0
      ·
      edit-2
      1 day ago

      Also see our traffic crossings, currency (notes), and preferential voting system for other things Australians do better than most of the rest of the world.

  • ohellidk@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 days ago

    DO NOT use hot water to help unlog a toilet. I’ve had the porcelain crack from the heat, had to replace the toilet entirely. Lesson learned.

    • reattach@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 days ago

      My kid flushed a rubber ball down the toilet before - it was exactly the right size and squishyness to get stuck. After trying many things, I was able to get it out by removing the toilet and pouring in boiling water - it softened the ball enough for it to be flushed out.

      It sounds like I got lucky. It was a warm day iirc - maybe that helped with the thermal stress.

      • MeatPilot@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        2 days ago

        Similar issue, my wife knocked the kids rubber ducky into the toilet well flushing it. A complicated maneuver because she hit it with her elbow knocking the ducky off the top of the tank exactly as she hit flush. Had to auger it to the bottom of the toilet and than unbolt it from the floor and yank it out from the bottom hole because it wouldn’t go past the lip where the toilet met the drain. Honestly probably better it didn’t go into the pipes and get jammed somewhere else I suppose.

        Guess I did all the way up to step 7?

        And, yes I remind her of this folly regularly.